Microsoft word - document
Bed Bug kit application instructions
Spray all areas of room including headboards, pet bedding, carpets, skirting, non
porous and hard surface areas, leave areas to dry before using again. Protector CIK
Spray product at insects from 5 cm for instant kill, then spray area till wet where
insect hide i.e., cracks crevices this will give long lasting protection for several
weeks always re - spray after cleaning affected areas Prevent
Spray onto hands and rub over exposed areas of body, can also be used as a
room spray repellent, spray into corners of room paying special attention to
1. Do Some Bed Bug Investigative Work
The first step to get rid of bed bugs is to do some investigative work. Pay close
attention to where people have sat or slept for long periods of time. Bed Bugs are
visible to the eye. The adult bed bug is brown to reddish-brown, oval-shaped,
flattened, and about 1/4 to 5/8 inch long. Be prepared to inspect all areas of the
room using a bright flashlight and a magnifying glass if you have one available.
Bed Bugs can leave reddish- brown spots on mattresses and have a distinct
smell. Remember that the bed bug's flat shape and small body enable it to hide
easily in cracks and crevices. Bed bugs, eggs and faecal deposits will go
unnoticed with just a casual inspection.
You should leave nothing unturned when doing your inspection for bed bugs and
no site should be ignored that may be a bed bug harbourage. Bed Bugs could be
hiding anywhere! Examples are: wall sconces, behind electrical switch plates,
behind wall posters, between books and magazines on shelves and in racks. Be
prepared to inspect all the places near sleeping areas, which may mean taking
the bed frames apart!
2. Prepare The Area
A thorough cleaning of the premises will make bed bug control efforts much more
effective. Strip all beds down to the bare sleeping surface. Bedding (sheets, blankets, comforters, covers, and protectors) should be washed in very hot water. Very hot water is lethal to bed bugs. Personal items (stuffed animals, soft toys, blankets) should be removed and cleaned. Clutter should be removed from furniture tops and bed stands. In severe infestations, clothing should be removed from dressers and chests. Utilise a crack & crevice tool to remove bed bugs from deep harbourages such as: under baseboards; under carpet edges (pull up along the tack); around switch plates (you may have to remove the plate first); from the bed frame; inside box springs; inside furniture; and from floor cracks. Use a hand-brush attachment to vacuum up most of the bed bugs. Vacuum mattresses and box springs (especially along seams and folds); upholstered furniture; and behind drapes. Also vacuum the floor completely. After vacuuming, remove the bag from the vacuum, tie it tightly, and remove it from the premises. 3. Attack the Bed Bugs Where They're Hiding To get rid of bed bugs effectively, you've got to hit them where they're hiding - in cracks and crevices. Place Residex P Dusting Powder in wall voids and under baseboards and in cracks and crevices. Follow the product label's instructions for bed bugs. Set off a Fortefog Mini fumer for every 7.5 cubic metres of space in each room to be treated. Place the fumer canister on a heat resistant surface, such as a large plate or baking tray, remove the plastic lid, light the fuse wire on the fumer furthest from the door first and then the other fumers working your way back to the door. Remove all fish tanks and pets, make sure all the windows are closed and close the door, leave the room closed for at least two hours, when you re-enter open all windows and doors to aerate the room. Dust may also be applied more easily along baseboards by pulling the carpet up from the tack and then putting it back into place. DO NOT spread dust over the carpets or under the carpets. Dusts are only for cracks and crevices, in wall voids and under baseboards, not in open spaces where people or animals travel. Concentrate most of your efforts on crack and crevice treatments. These are the areas where bed bugs hide. Protector C is an insecticides that is excellent for bed bug control. This insecticide provides quick knock-down and long residual control of bed bugs. Make sure that you follow the product label's directions for bed bug control before spraying. 4. Treat the Bed The bed area needs to be treated next. Look carefully at the folds and seams of the mattress, the headboard, foot board (if present), box spring/support platform,
frame, etc. You will be able to see the bed bugs with the visible eye or the aid of
a small magnifying glass. All cracks and crevices of the bed structure should be
treated for bed bugs with a light application of Protector C, Apply the spray on the
tufts, folds and seams of the mattress. The underside of the box spring may be
sprayed with liquid insecticides as well or spot-treated with Protector CIK.
TIP: After treating the bedding for bed bugs and after it has dried thoroughly,
cover the mattress with a plastic or allergy-proof cover.
5. Treat the Furniture (Night Stand, Chests, Dressers, Couches and Chairs)
The last step in bed bug elimination is to do a very thorough crack and crevice
treatment of the furniture in the room. For wooden furniture pieces, you cannot
miss any cracks, for upholstered furniture, apply Protector C. Always turn bed
bug infested furniture over and treat from the bottom. Look carefully underneath
all the legs of the furniture! Bed Bugs love to hide in the most unlikely places!
Some furniture may have hollow metal framing (children’s bunk beds are an
example). Treat inside the metal tubing with dusts, aerosols or liquids as
discussed in the bedding paragraph above.
6. Follow-up in 2 weeks!
Getting rid of bed bugs is not easy. Inspect the treated room again in two weeks.
Do a thorough inspection (especially cracks and crevices) and treat any area
where bed bugs are persisting or where they have moved. You may be-able to
avoid reusing the insecticide concentrates and just use a contact spray with
pyrethrins such as Protector CIK. Your wall voids will not need to be re-dusted. If
you treated your bedding properly and covered it in plastic, you may just need to
retreat spot areas of the room.
TIP: Heavy bed bug infestations may need more than a second treatment. Be
persistent! Product Recommendations:
To get rid of bed bugs effectively we'd recommend purchasing at least one of
each type of product below for a complete bed bug control treatment. Don't forget
to purchase enough for a follow-up treatment in two weeks:
1. Dusts: Dusts such as Residex P Dusting Powder for crack and crevice
treatments. Dusts kill bed bugs where they are most likely to harbour: in cracks
2. Liquid Insecticides: Use a Residual (long lasting) liquid insecticide such as
Protector C. Use each as their respective label directs for applying to mattresses,
furniture pieces, the bed frame and cracks and crevices.
3. Contact Kill Aerosols: Contact sprays with pyrethrins such as Protector CIK, kill bed bugs immediately on contact. These aerosols are great for spot treatments. 4. Fumigation: Use Fortefog Mini Fumers containing Permethrin, this form of fumigation will penetrate many of the harbourages of bed bugs. Read the label application rates for correct dosage application rates.
CIMI Tall Ship Expeditions Aboard SSV TOLE MOUR STUDENT APPLICATION –MEDICAL FORM SCHOOL: _______________________________________ STUDENT INFORMATION (COMPLETE IN FULL) Do not staple or copy on colored paper dent and explain below. q Asthmaq Backaches or weak backq Bowel or bladder problemsq Car/Sea sicknessq Epilepsy or convulsive disorderq Hay feverq Headacheq Heart trouble or murmurI
Leadership In Organizations (5th Edition) Opbygningen af referatet: Kapitlerne i bogen afsluttes med et referat. Disse referater er nedenstående gengivet ved at opdele disse i kapitlernes hovedafsnit. Eksempel; Den del af referatet af kapitel 1 der omhandler afsnit 1 - “Definitions of Leadership” - er gengivet under denne overskrift, ligesom tilhørende tabeller og figurer.