No title

WATTYL EPINAMEL MF920 PART B
Chemwatch Independent Material Safety Data Sheet
Issue Date: 28-Oct-2010
CHEMWATCH 15-7019
Version No:2.1.1.1
CD 2013/1 Page 1 of 10
Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME
WATTYL EPINAMEL MF920 PART B
SYNONYMS
"Product Code: 202679"
PROPER SHIPPING NAME
FLAMMABLE LIQUID, CORROSIVE, N.O.S.(contains xylene and epoxy amine adduct)
PRODUCT USE
■ The use of a quantity of material in an unventilated or confined space may result in increased exposure and an irritating
atmosphere developing. Before starting consider control of exposure by mechanical ventilation.
Used according to manufacturer's directions.
Hardener or Part B of a 2 pack.
epoxy coating system.
Requires that the two parts be mixed by hand or mixer before use, in accordance with manufacturers directions. Mix only as much
as is required. Do not return the mixed material to the original containers.
SUPPLIER
Company: Valspar Paint (Australia) Pty Limited
Address:
Level 4, 2 Burbank Place
Baulkham Hills
NSW, 2153
Australia
Telephone: +61 2 8867 3333
Emergency Tel:1800 039 008
Fax: +61 2 8867 3344
Section 2 - HAZARDS IDENTIFICATION
STATEMENT OF HAZARDOUS NATURE
HAZARDOUS SUBSTANCE. DANGEROUS GOODS. According to the Criteria of NOHSC, and the ADG Code.
RISK
Risk Codes
• Harmful by inhalation, in contact with skin and ifswallowed.
• May cause SENSITISATION by skin contact.
• HARMFUL- May cause lung damage if swallowed.
• Vapours may cause drowsiness and dizziness.
SAFETY
Safety Codes
• Do not breathe gas/fumes/vapour/spray.
• Wear suitable protective clothing.
• Use only in well ventilated areas.
• Keep container in a well ventilated place.
• To clean the floor and all objects contaminated by this material, use waterand detergent.
continued.
WATTYL EPINAMEL MF920 PART B
Chemwatch Independent Material Safety Data Sheet
Issue Date: 28-Oct-2010
CHEMWATCH 15-7019
Version No:2.1.1.1
CD 2013/1 Page 2 of 10
Section 2 - HAZARDS IDENTIFICATION
• Take off immediately all contaminated clothing.
• In case of contact with eyes, rinse with plenty of water and contact Doctor orPoisons Information Centre.
• In case of accident or if you feel unwell IMMEDIATELY contact Doctor orPoisons Information Centre (show label if possible).
• This material and its container must be disposed of as hazardous waste.
Section 3 - COMPOSITION / INFORMATION ON INGREDIENTS
NOTE: Manufacturer has supplied full ingredientinformation to allow CHEMWATCH assessment.
contains less than 0.1% benzene Section 4 - FIRST AID MEASURES
SWALLOWED
• Avoid giving milk or oils.
• Avoid giving alcohol.
• For advice, contact a Poisons Information Centre or a doctor at once.
• Urgent hospital treatment is likely to be needed.
• If swallowed do NOT induce vomiting.
• If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain open airway and
prevent aspiration.
• If spontaneous vomiting appears imminent or occurs, hold patient's head down, lower than their hips to help avoid possible
aspiration of vomitus.
EYE
■ If this product comes in contact with the eyes:
• Immediately hold eyelids apart and flush the eye continuously with running water.
• Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting
the upper and lower lids.
• Continue flushing until advised to stop by the Poisons Information Centre or a doctor, or for at least 15 minutes.
• Transport to hospital or doctor without delay.
SKIN
■ If skin or hair contact occurs:
• Immediately flush body and clothes with large amounts of water, using safety shower if available.
• Quickly remove all contaminated clothing, including footwear.
• Wash skin and hair with running water. Continue flushing with water until advised to stop by the Poisons Information Centre.
• Transport to hospital, or doctor.
INHALED
• If fumes or combustion products are inhaled remove from contaminated area.
• Lay patient down. Keep warm and rested.
• Prostheses such as false teeth, which may block airway, should be removed, where possible, prior to initiating first aid
procedures.
• Apply artificial respiration if not breathing, preferably with a demand valve resuscitator, bag-valve mask device, or pocket
mask as trained. Perform CPR if necessary.
• Inhalation of vapours or aerosols (mists, fumes) may cause lung oedema.
• Corrosive substances may cause lung damage (e.g. lung oedema, fluid in the lungs).
• As this reaction may be delayed up to 24 hours after exposure, affected individuals need complete rest (preferably in semi-
recumbent posture) and must be kept under medical observation even if no symptoms are (yet) manifested.
• Before any such manifestation, the administration of a spray containing a dexamethasone derivative or beclomethasone derivative
may be considered.
continued.
WATTYL EPINAMEL MF920 PART B
Chemwatch Independent Material Safety Data Sheet
Issue Date: 28-Oct-2010
CHEMWATCH 15-7019
Version No:2.1.1.1
CD 2013/1 Page 3 of 10
Section 4 - FIRST AID MEASURES
NOTES TO PHYSICIAN
■ Any material aspirated during vomiting may produce lung injury. Therefore emesis should not be induced mechanically or
pharmacologically.
For acute or short-term repeated exposures to highly alkaline materials:
• Respiratory stress is uncommon but present occasionally because of soft tissue edema.
• Unless endotracheal intubation can be accomplished under direct vision, cricothyroidotomy or tracheotomy may be necessary.
• Oxygen is given as indicated.
• The presence of shock suggests perforation and mandates an intravenous line and fluid administration.
Clinical experience of benzyl alcohol poisoning is generally confined to premature neonates in receipt of preserved intravenous
salines.
• Metabolic acidosis, bradycardia, skin breakdown, hypotonia, hepatorenal failure, hypotension and cardiovascular collapse are
• High urine benzoate and hippuric acid as well as elevated serum benzoic acid levels are found.
• The so-called "gasping syndrome describes the progressive neurological deterioration of poisoned neonates.
• Management is essentially supportive.
For acute or short term repeated exposures to xylene:• Gastro-intestinal absorption is significant with ingestions. For ingestions exceeding 1-2 ml (xylene)/kg, intubation and lavage with cuffed endotracheal tube is recommended. The use of charcoal and cathartics is equivocal.
• Pulmonary absorption is rapid with about 60-65% retained at rest.
• Primary threat to life from ingestion and/or inhalation, is respiratory failure.
• Patients should be quickly evaluated for signs of respiratory distress (e.g. cyanosis, tachypnoea, intercostal retraction, obtundation) and given oxygen. Patients with inadequate tidal volumes or poor arterial blood gases (pO2 < 50 mm Hg or pCO2 > 50mm Hg) should be intubated.
Depending on the degree of exposure, periodic medical examination is indicated. The symptoms of lung oedema often do not manifestuntil a few hours have passed and they are aggravated by physical effort.
Section 5 - FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA
• Water spray or fog.
• Alcohol stable foam.
• Dry chemical powder.
• Carbon dioxide.
FIRE FIGHTING
• Alert Fire Brigade and tell them location and nature of hazard.
• May be violently or explosively reactive.
• Wear breathing apparatus plus protective gloves in the event of a fire.
• Prevent, by any means available, spillage from entering drains or water course.
FIRE/EXPLOSION HAZARD
• Liquid and vapour are flammable.
• Moderate fire hazard when exposed to heat or flame.
• Vapour forms an explosive mixture with air.
• Moderate explosion hazard when exposed to heat or flame.
Combustion products include: carbon dioxide (CO2), carbon monoxide (CO), aldehydes, nitrogen oxides (NOx), other pyrolysis
products typical of burning organic material.
Contains low boiling substance: Closed containers may rupture due to pressure buildup under fire conditions.
FIRE INCOMPATIBILITY
• Avoid contamination with oxidising agents i.e. nitrates, oxidising acids, chlorine bleaches, pool chlorine etc. as ignition may
HAZCHEM
•3W
Section 6 - ACCIDENTAL RELEASE MEASURES
MINOR SPILLS
• Remove all ignition sources.
• Clean up all spills immediately.
• Avoid breathing vapours and contact with skin and eyes.
• Control personal contact with the substance, by using protective equipment.
continued.
WATTYL EPINAMEL MF920 PART B
Chemwatch Independent Material Safety Data Sheet
Issue Date: 28-Oct-2010
CHEMWATCH 15-7019
Version No:2.1.1.1
CD 2013/1 Page 4 of 10
Section 6 - ACCIDENTAL RELEASE MEASURES
MAJOR SPILLS
• Clear area of personnel and move upwind.
• Alert Fire Brigade and tell them location and nature of hazard.
• May be violently or explosively reactive.
• Wear full body protective clothing with breathing apparatus.
Personal Protective Equipment advice is contained in Section 8 of the MSDS.
Section 7 - HANDLING AND STORAGE
PROCEDURE FOR HANDLING
• Containers, even those that have been emptied, may contain explosive vapours.
• Do NOT cut, drill, grind, weld or perform similar operations on or near containers.
• DO NOT allow clothing wet with material to stay in contact with skin.
• Electrostatic discharge may be generated during pumping - this may result in fire.
• Ensure electrical continuity by bonding and grounding (earthing) all equipment.
• Restrict line velocity during pumping in order to avoid generation of electrostatic discharge (<=1 m/sec until fill pipe
submerged to twice its diameter, then <= 7 m/sec).
• Avoid splash filling.
• DO NOT USE brass or copper containers / stirrers.
• Avoid all personal contact, including inhalation.
• Wear protective clothing when risk of overexposure occurs.
• Use in a well-ventilated area.
• Prevent concentration in hollows and sumps.
SUITABLE CONTAINER
• Packing as supplied by manufacturer.
• Plastic containers may only be used if approved for flammable liquid.
• Check that containers are clearly labelled and free from leaks.
• For low viscosity materials (i) : Drums and jerry cans must be of the non-removable head type. (ii) : Where a can is to be used
as an inner package, the can must have a screwed enclosure.
• For materials with a viscosity of at least 2680 cSt. (23 deg. C)
• For manufactured product having a viscosity of at least 250 cSt. (23 deg. C)
• Manufactured product that requires stirring before use and having a viscosity of at least 20 cSt (25 deg. C): (i) Removable
head packaging; (ii) Cans with friction closures and (iii) low pressure tubes and cartridges may be used.
STORAGE INCOMPATIBILITY
• Reacts with aluminium / zinc producing flammable, explosive hydrogen gas.
• Reacts with mild steel, galvanised steel / zinc producing hydrogen gas which may form an explosive mixture with air.
Alcohols
• are incompatible with strong acids, acid chlorides, acid anhydrides, oxidising and reducing agents.
• reacts, possibly violently, with alkaline metals and alkaline earth metals to produce hydrogen
• react with strong acids, strong caustics, aliphatic amines, isocyanates, acetaldehyde, benzoyl peroxide, chromic acid, chromium
oxide, dialkylzincs, dichlorine oxide, ethylene oxide, hypochlorous acid, isopropyl chlorocarbonate, lithium
tetrahydroaluminate, nitrogen dioxide, pentafluoroguanidine, phosphorus halides, phosphorus pentasulfide, tangerine oil,
triethylaluminium, triisobutylaluminium
• should not be heated above 49 deg. C. when in contact with aluminium equipment.
• Avoid strong acids, acid chlorides, acid anhydrides and chloroformates.
• Avoid contact with copper, aluminium and their alloys.
STORAGE REQUIREMENTS
• Store in original containers in approved flammable liquid storage area.
• Store away from incompatible materials in a cool, dry, well-ventilated area.
• DO NOT store in pits, depressions, basements or areas where vapours may be trapped.
• No smoking, naked lights, heat or ignition sources.
• DO NOT store near acids, or oxidising agents.
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
EXPOSURE CONTROLS
continued.
WATTYL EPINAMEL MF920 PART B
Chemwatch Independent Material Safety Data Sheet
Issue Date: 28-Oct-2010
CHEMWATCH 15-7019
Version No:2.1.1.1
CD 2013/1 Page 5 of 10
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
The following materials had no OELs on our records• benzyl alcohol: MATERIAL DATA
BENZYL ALCOHOL:
TRIMETHYLHEXAMETHYLENE DIAMINE:
WATTYL EPINAMEL MF920 PART B:
■ Sensory irritants are chemicals that produce temporary and undesirable side-effects on the eyes, nose or throat.
Historically occupational exposure standards for these irritants have been based on observation of workers' responses to variousairborne concentrations.
■ Exposure limits with "skin" notation indicate that vapour and liquid may be absorbed through intact skin. Absorption by skin may readily exceed vapour inhalation exposure. Symptoms for skin absorption are the same as for inhalation. Contact with eyes andmucous membranes may also contribute to overall exposure and may also invalidate the exposure standard.
■ for xylenes:IDLH Level: 900 ppmOdour Threshold Value: 20 ppm (detection), 40 ppm (recognition)NOTE: Detector tubes for o-xylene, measuring in excess of 10 ppm, are available commercially. (m-xylene and p-xylene give almost the same response).<</>.
■ No exposure limits set by NOHSC or ACGIH.
PERSONAL PROTECTION
RESPIRATOR
•Type AK-P Filter of sufficient capacity. (AS/NZS 1716 & 1715, EN 143:2000 & 149:2001, ANSI Z88 or national equivalent)
EYE
• Chemical goggles.
• Full face shield may be required for supplementary but never for primary protection of eyes
• Contact lenses may pose a special hazard; soft contact lenses may absorb and concentrate irritants. A written policy document,
describing the wearing of lens or restrictions on use, should be created for each workplace or task. This should include areview of lens absorption and adsorption for the class of chemicals in use and an account of injury experience. Medical andfirst-aid personnel should be trained in their removal and suitable equipment should be readily available. In the event ofchemical exposure, begin eye irrigation immediately and remove contact lens as soon as practicable. Lens should be removed atthe first signs of eye redness or irritation - lens should be removed in a clean environment only after workers have washedhands thoroughly. [CDC NIOSH Current Intelligence Bulletin 59], [AS/NZS 1336 or national equivalent].
HANDS/FEET
• Wear chemical protective gloves, e.g. PVC.
• Wear safety footwear or safety gumboots, e.g. Rubber.
• When handling corrosive liquids, wear trousers or overalls outside of boots, to avoid spills entering boots.
NOTE:
• The material may produce skin sensitisation in predisposed individuals. Care must be taken, when removing gloves and other
protective equipment, to avoid all possible skin contact.
• Contaminated leather items, such as shoes, belts and watch-bands should be removed and destroyed.
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality which vary frommanufacturer to manufacturer. Where the chemical is a preparation of several substances, the resistance of the glove material cannot be calculated in advance and has therefore to be checked prior to the application.
The exact break through time for substances has to be obtained from the manufacturer of the protective gloves and continued.
WATTYL EPINAMEL MF920 PART B
Chemwatch Independent Material Safety Data Sheet
Issue Date: 28-Oct-2010
CHEMWATCH 15-7019
Version No:2.1.1.1
CD 2013/1 Page 6 of 10
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
has to be observed when making a final choice.
Suitability and durability of glove type is dependent on usage. Important factors in the selection of gloves include: OTHER
• Overalls.
• PVC Apron.
• PVC protective suit may be required if exposure severe.
• Eyewash unit.
ENGINEERING CONTROLS
■ CARE: Use of a quantity of this material in confined space or poorly ventilated area, where rapid build up of concentrated
atmosphere may occur, could require increased ventilation and/or protective gear.
Engineering controls are used to remove a hazard or place a barrier between the worker and the hazard. Well-designed engineering
controls can be highly effective in protecting workers and will typically be independent of worker interactions to provide this
high level of protection.
The basic types of engineering controls are:
Process controls which involve changing the way a job activity or process is done to reduce the risk.
Enclosure and/or isolation of emission source which keeps a selected hazard "physically" away from the worker and ventilation
that strategically "adds" and "removes" air in the work environment.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE
Clear colourless flammable liquid with a solvent odour; not miscible with water.
PHYSICAL PROPERTIES
Liquid.
Does not mix with water.
Floats on water.
Corrosive.
Section 10 - STABILITY AND REACTIVITY
CONDITIONS CONTRIBUTING TO INSTABILITY
• Presence of incompatible materials.
• Product is considered stable.
• Hazardous polymerisation will not occur.
For incompatible materials - refer to Section 7 - Handling and Storage.
Section 11 - TOXICOLOGICAL INFORMATION
POTENTIAL HEALTH EFFECTS
ACUTE HEALTH EFFECTS
SWALLOWED
■ Accidental ingestion of the material may be harmful; animal experiments indicate that ingestion of less than 150 gram may be
fatal or may produce serious damage to the health of the individual.
The material can produce chemical burns within the oral cavity and gastrointestinal tract following ingestion.
Swallowing of the liquid may cause aspiration into the lungs with the risk of chemical pneumonitis; serious consequences may
continued.
WATTYL EPINAMEL MF920 PART B
Chemwatch Independent Material Safety Data Sheet
Issue Date: 28-Oct-2010
CHEMWATCH 15-7019
Version No:2.1.1.1
CD 2013/1 Page 7 of 10
Section 11 - TOXICOLOGICAL INFORMATION
result. (ICSC13733).
Overexposure to non-ring alcohols causes nervous system symptoms. These include headache, muscle weakness and inco-ordination,giddiness, confusion, delirium and coma. Digestive symptoms may include nausea, vomiting and diarrhoea. Aspiration is much moredangerous than ingestion because lung damage can occur and the substance is absorbed into the body. Alcohols with ring structuresand secondary and tertiary alcohols cause more severe symptoms, as do heavier alcohols.
Amines without benzene rings when swallowed are absorbed throughout the gut. Corrosive action may cause damage throughout thegastrointestinal tract. They are removed through the liver, kidney and intestinal mucosa by enzyme breakdown.
EYE
■ The material can produce chemical burns to the eye following direct contact. Vapours or mists may be extremely irritating.
I f applied to the eyes, this material causes severe eye damage.
Vapours of volatile amines irritate the eyes, causing excessive secretion of tears, inflammation of the conjunctiva and slight
swelling of the cornea, resulting in "halos" around lights. This effect is temporary, lasting only for a few hours. However this
condition can reduce the efficiency of undertaking skilled tasks, such as driving a car. Direct eye contact with liquid volatile
amines may produce eye damage, permanent for the lighter species.
SKIN
■ Skin contact with the material may be harmful; systemic effects may result following absorption.
The material can produce chemical burns following direct contactwith the skin.
There is some evidence to suggest that the material may cause moderate inflammation of the skin either following direct contact
or after a delay of some time. Repeated exposure can cause contact dermatitis which is characterised by redness, swelling and
blistering.
Most liquid alcohols appear to act as primary skin irritants in humans. Significant percutaneous absorption occurs in rabbits but
not apparently in man.
Entry into the blood-stream, through, for example, cuts, abrasions or lesions, may produce systemic injury with harmful effects.
Examine the skin prior to the use of the material and ensure that any external damage is suitably protected.
There is some evidence to suggest that this material, on a single contact with skin, can cause irreversible damage of organs.
INHALED
■ Inhalation of vapours may cause drowsiness and dizziness. This may be accompanied by sleepiness, reduced alertness, loss of
reflexes, lack of co-ordination, and vertigo.
There is some evidence to suggest that the material can cause respiratory irritation in some persons. The body's response to such
irritation can cause further lung damage.
Aliphatic alcohols with more than 3-carbons cause headache, dizziness, drowsiness, muscle weakness and delirium, central
depression, coma, seizures and behavioural changes. Secondary respiratory depression and failure, as well as low blood pressure
and irregular heart rhythms, may follow. Nausea and vomiting are seen, and liver and kidney damage is possible as well following
massive exposures. Symptoms are more acute the more carbons there are in the alcohol.
Inhalation of quantities of liquid mist may be extremely hazardous, even lethal due to spasm, extreme irritation of larynx and
bronchi, chemical pneumonitis and pulmonary oedema.
Inhalation of aerosols (mists, fumes), generated by the material during the course of normal handling, may be harmful.
There is some evidence to suggest that this materialcan cause, if inhaled once, irreversible damageof organs.
CHRONIC HEALTH EFFECTS
■ There has been concern that this material can cause cancer or mutations, but there is not enough data to make an assessment.
Repeated or prolonged exposure to corrosives may result in the erosion of teeth, inflammatory and ulcerative changes in the mouth
and necrosis (rarely) of the jaw. Bronchial irritation, with cough, and frequent attacks of bronchial pneumonia may ensue.
Gastrointestinal disturbances may also occur. Chronic exposures may result in dermatitis and/or conjunctivitis.
Skin contact with the material is more likely to cause a sensitisation reaction in some persons compared to the general
population.
Substance accumulation, in the human body, may occur and may cause some concern following repeated or long-term occupational
exposure.
There is some evidence that inhaling this product is more likely to cause a sensitisation reaction in some persons compared to
the general population.
There is some evidence from animal testing that exposure to this material may result in toxic effects to the unborn baby.
Exposure to the material for prolonged periods may cause physical defects in the developing embryo (teratogenesis).
The material may accumulate in the human body and progressively causetissue damage.
TOXICITY AND IRRITATION
■ Contact allergies quickly manifest themselves as contact eczema, more rarely as urticaria or Quincke's oedema. The pathogenesis
of contact eczema involves a cell-mediated (T lymphocytes) immune reaction of the delayed type. Other allergic skin reactions,
e.g. contact urticaria, involve antibody-mediated immune reactions. The significance of the contact allergen is not simply
determined by its sensitisation potential: the distribution of the substance and the opportunities for contact with it are
equally important. A weakly sensitising substance which is widely distributed can be a more important allergen than one with
stronger sensitising potential with which few individuals come into contact. From a clinical point of view, substances are
noteworthy if they produce an allergic test reaction in more than 1% of the persons tested.
The material may produce severe irritation to the eye causing pronounced inflammation. Repeated or prolonged exposure to
irritants may produce conjunctivitis.
Asthma-like symptoms may continue for months or even years after exposure to the material ceases. This may be due to a non-
allergenic condition known as reactive airways dysfunction syndrome (RADS) which can occur following exposure to high levels of
highly irritating compound.
continued.
WATTYL EPINAMEL MF920 PART B
Chemwatch Independent Material Safety Data Sheet
Issue Date: 28-Oct-2010
CHEMWATCH 15-7019
Version No:2.1.1.1
CD 2013/1 Page 8 of 10
Section 11 - TOXICOLOGICAL INFORMATION
The material may produce respiratory tract irritation, and result in damage to the lung including reduced lung function.
The material may cause skin irritation after prolonged or repeated exposure and may produce on contact skin redness, swelling,the production of vesicles, scaling and thickening of the skin.
CARCINOGEN
xylene
SKIN
benzyl alcohol
GESAMP/EHS Composite List - GESAMP Hazard GESAMP/EHS Composite List - GESAMP Hazard GESAMP/EHS Composite List - GESAMP Hazard GESAMP/EHS Composite List - GESAMP Hazard Section 12 - ECOLOGICAL INFORMATION
Harmful to aquatic organisms.
This material and its container must be disposed of as hazardous waste.
Ecotoxicity
Ingredient
Section 13 - DISPOSAL CONSIDERATIONS
• Containers may still present a chemical hazard/ danger when empty.
• Return to supplier for reuse/ recycling if possible.
Otherwise:• If container can not be cleaned sufficiently well to ensure that residuals do not remain or if the container cannot be used to store the same product, then puncture containers, to prevent re-use, and bury at an authorised landfill.
• Where possible retain label warnings and MSDS and observe all notices pertaining to the product.
• DO NOT allow wash water from cleaning or process equipment to enter drains.
• It may be necessary to collect all wash water for treatment before disposal.
• In all cases disposal to sewer may be subject to local laws and regulations and these should be considered first.
• Where in doubt contact the responsible authority.
• Recycle wherever possible.
• Consult manufacturer for recycling options or consult local or regional waste management authority for disposal if no suitable treatment or disposal facility can be identified.
• Treat and neutralise at an approved treatment plant. Treatment should involve: Neutralisation with suitable dilute acid followed by: burial in a land-fill specifically licenced to accept chemical and / or pharmaceutical wastes or Incineration in a licenced apparatus• Decontaminate empty containers. Observe all label safeguards until containers are cleaned and destroyed.
continued.
WATTYL EPINAMEL MF920 PART B
Chemwatch Independent Material Safety Data Sheet
Issue Date: 28-Oct-2010
CHEMWATCH 15-7019
Version No:2.1.1.1
CD 2013/1 Page 9 of 10
Section 14 - TRANSPORTATION INFORMATION
Labels Required: FLAMMABLE LIQUID,CORROSIVE HAZCHEM:
•3W (ADG7)
ADG7:
Class or Division:
Name and Description: FLAMMABLE LIQUID, CORROSIVE, N.O.S. (contains Land Transport UNDG:
Class or division:
Shipping Name:FLAMMABLE LIQUID, CORROSIVE, N.O.S. (contains xylene and Air Transport IATA:
ICAO/IATA Class:
Shipping name:FLAMMABLE LIQUID, CORROSIVE, N.O.S.(contains xylene and epoxy amine adduct) Maritime Transport IMDG:
IMDG Class:
Shipping name:FLAMMABLE LIQUID, CORROSIVE, N.O.S.(contains xylene and epoxy amine adduct) Section 15 - REGULATORY INFORMATION
Indications of Danger:
C
REGULATIONS
Regulations for ingredients
benzyl alcohol (CAS: 100-51-6) is found on the following regulatory lists;
"Acros Transport Information","Australia - Victoria Occupational Health and Safety Regulations - Schedule 9: Materials at Major
Hazard Facilities (And Their Threshold Quantity) Table 2","Australia Hazardous Substances","Australia High Volume Industrial
Chemical List (HVICL)","Australia Inventory of Chemical Substances (AICS)","GESAMP/EHS Composite List - GESAMP Hazard Profiles",
"IMO IBC Code Chapter 17: Summary of minimum requirements","IMO MARPOL 73/78 (Annex II) - List of Noxious Liquid Substances
Carried in Bulk","International Council of Chemical Associations (ICCA) - High Production Volume List","International Fragrance
Association (IFRA) Standards Restricted","International Fragrance Association (IFRA) Survey: Transparency List","International
Fragrance Association IFRA Standards Annex I","International Numbering System for Food Additives","OECD List of High Production
Volume (HPV) Chemicals","Sigma-AldrichTransport Information"
xylene (CAS: 1330-20-7) is found on the following regulatory lists;
"Australia - Australian Capital Territory - Environment Protection Regulation: Ambient environmental standards (Domestic water
supply - organic compounds)","Australia - Australian Capital Territory - Environment Protection Regulation: Pollutants entering
waterways taken to cause environmental harm - Domestic water supply quality","Australia Drinking Water Guideline Values For
Physical and Chemical Characteristics","Australia Exposure Standards","Australia Hazardous Substances","Australia High Volume
Industrial Chemical List (HVICL)","Australia Inventory of Chemical Substances (AICS)","Australia National Pollutant Inventory",
"Australia Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP) - Appendix E (Part 2)","Australia Standard for
continued.
WATTYL EPINAMEL MF920 PART B
Chemwatch Independent Material Safety Data Sheet
Issue Date: 28-Oct-2010
CHEMWATCH 15-7019
Version No:2.1.1.1
CD 2013/1 Page 10 of 10
Section 15 - REGULATORY INFORMATION
the Uniform Scheduling of Medicines and Poisons (SUSMP) - Appendix F (Part 3)","Australia Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP) - Appendix I","Australia Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP) - Schedule 5","Australia Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP) - Schedule 6","Australia Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP) - Schedule 7","FisherTransport Information","GESAMP/EHS Composite List - GESAMP Hazard Profiles","IMO IBC Code Chapter 17: Summary of minimum requirements","IMO MARPOL 73/78 (Annex II) - List of Noxious Liquid Substances Carried in Bulk","IMO Provisional Categorization of Liquid Substances - List 3: (Trade-named) mixtures containing at least 99% by weight of components already assessed by IMO, presenting safety hazards","International Agency for Research on Cancer (IARC) - Agents Reviewed by the IARC Monographs","International Council of Chemical Associations (ICCA) - High Production Volume List","International Fragrance Association (IFRA) Survey: Transparency List","OECD List of High Production Volume (HPV) Chemicals","OSPAR List of Chemicals for Priority Action","WHO Guidelines for Drinking-water Quality - Guideline values for chemicals that are of health significance in drinking-water" isophorone diamine (CAS: 2855-13-2) is found on the following regulatory lists;
"Australia Hazardous Substances","Australia High Volume Industrial Chemical List (HVICL)","Australia Inventory of Chemical
Substances (AICS)","Australia National Pollutant Inventory","Australia Standard for the Uniform Scheduling of Medicines and
Poisons (SUSMP) - Appendix E (Part 2)","Australia Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP) - Schedule
5","FisherTransport Information","GESAMP/EHS Composite List - GESAMP Hazard Profiles","IMO IBC Code Chapter 17: Summary of
minimum requirements","IMO MARPOL 73/78 (Annex II) - List of Noxious Liquid Substances Carried in Bulk","International Council of
Chemical Associations (ICCA) - High Production Volume List","OECD List of High Production Volume (HPV) Chemicals","Sigma-
AldrichTransport Information"
trimethylhexamethylene diamine (CAS: 25620-58-0,25513-64-8) is found on the following
regulatory lists;
"Australia Inventory of Chemical Substances (AICS)","Australia National Pollutant Inventory","OECD List of High Production Volume
(HPV) Chemicals","Sigma-AldrichTransport Information"
No data for Wattyl Epinamel MF920 Part B (CW: 15-7019)
Section 16 - OTHER INFORMATION
Denmark Advisory list for selfclassification of dangerous substances
Substance
INGREDIENTS WITH MULTIPLE CAS NUMBERS
Ingredient Name
■ Classification of the preparation and its individual components has drawn on official and authoritative sources as well as independent review by the Chemwatch Classification committee using available literature references.
A list of reference resources used to assist the committee may be found at: www.chemwatch.net/references.
■ The (M)SDS is a Hazard Communication tool and should be used to assist in the Risk Assessment. Many factors determine whether the reported Hazards are Risks in the workplace or other settings.
This document is copyright. Apart from any fair dealing for the purposes of private study, research, review orcriticism, as permitted under the Copyright Act, no part may be reproduced by any process without writtenpermission from CHEMWATCH. TEL (+61 3) 9572 4700. Issue Date: 28-Oct-2010Print Date: 26-Mar-2013

Source: http://www.wattylindustrial.com.au/documents/pcm/msds/EPINAMEL%20MF920%20PART%20B%2015-7019%20Oct10.pdf