Fob multiplex red tds:fg_ multiplex.qxd

Multiplex® Red
Multiplex Red is a high-performance, multipurpose, extreme- Multipurpose,
pressure (EP) lithium complex grease developed to satisfy the Extreme-Pressure
severe lubrication requirements of heavily loaded plain androlling element bearings operating at moderate to high Lithium Complex
temperatures. It is particularly recommended for use in Grease; NLGI GC-LB
automotive and industrial applications that are too severe or Certified
require higher performance than that provided by conventionalextreme-pressure lithium greases.
Multiplex Red is manufactured with high-quality paraffinic baseoils thickened with lithium complex soap. It contains an effectiveextreme-pressure additive, a tackifier, and rust and oxidationinhibitors to provide outstanding wear protection, excellentthermal stability at high temperatures, and excellent resistance tocorrosion and water washout. It forms an effective seal to helpminimize bearing contamination and provides a high level ofadhesion to the bearing surface for improved retention, reducedleakage and resistance to water washout. It is dyed red for easeof identification.
Contact Information
Multiplex Red Grades No. 1 and No. 2 are NLGI GC-LB certified U.S. Customer
for use as multipurpose automotive wheel bearing and chassis Service:
1-800-822-6457
Applications
Technical Hot Line:
• Wheel bearings of passenger cars, trucks, high-performance 1-800-766-0050
vehicles, sport utility vehicles and motorcycles equipped withdisc brakes International
• Ball joints, universal joints, other chassis points and water Customer Service:
pumps on passenger cars, trucks and other mobile equipment +1-832-486-3363
• Heavily loaded plain and rolling element bearings in industrial, +1-832-486-3870
mining and mobile equipment where a water-resistant, high-temperature, extreme-pressure grease is required E-mail address:
Features/Benefits
lubricants@
conocophillips.com
• Excellent high-temperature performance• Outstanding wear protection• High load-carrying capacity• Protects against rust and corrosion• Excellent resistance to water washout• Good low-temperature pumpability• NLGI GC-LB certified (Grades No. 1 and No. 2) http://lubricants.conocophillips.com
600 N. Dairy Ashford • 2W9000 • Houston, TX 77079 Multiplex® Red
Typical Properties
NLGI Grade
Penetration, Worked (60 strokes), ASTM D217 Four-Ball Wear, ASTM D2266, Scar Diameter, mm Oxidation Stability, ASTM D942, 100 hours, Health and Safety Information
For recommendations on safe handling and use of this product, please refer to the Material
Safety Data Sheet via http://w3.conocophillips.com/NetMSDS.
Typical properties are average values only and do not constitute a specification. Minor variations that do not affect product performance are to be expected during normal manufacture, and at different blending locations. Product formulations are subject to change without notification.
Copyright 2009 ConocoPhillips Company. The ConocoPhillips logo, Conoco, the Conoco logo, Phillips 66, the Phillips 66 logo, 76 and the 76 logo are trademarks of ConocoPhillips Company in theU.S.A. and other countries.

Source: http://up.farsscript.ir/uploads/13315993391.pdf