Re a c t iv it y
P e rs o n a l
P ro t e c t io n
Material Safety Data Sheet
Sulfuric acid MSDS
Section 1: Chemical Product and Company Identification
SLS2539, SLS1741, SLS3166, SLS2371,
US Sales: 1-800-901-7247
International Sales: 1-281-441-4400
TSCA 8(b) inventory: Sulfuric acid
CHEMTREC (24HR Emergency Telephone), call:
Oil of Vitriol; Sulfuric Acid
International CHEMTREC, call:
For non-emergency assistance, call:
Section 2: Composition and Information on Ingredients
% by Weight
Toxicological Data on Ingredients:
Sulfuric acid: ORAL (LD50): Acute: 2140 mg/kg [Rat.]. VAPOR (LC50): Acute: 510 mg/m
2 hours [Rat]. 320 mg/m 2 hours [Mouse].
Section 3: Hazards Identification
Potential Acute Health Effects:
Very hazardous in case of skin contact (corrosive, irritant, permeator), of eye contact (irritant, corrosive), of ingestion,
of inhalation. Liquid or spray mist may produce tissue damage particularly on mucous membranes of eyes, mouth and
respiratory tract. Skin contact may produce burns. Inhalation of the spray mist may produce severe irritation of respiratory
tract, characterized by coughing, choking, or shortness of breath. Severe over-exposure can result in death. Inflammation of
the eye is characterized by redness, watering, and itching. Skin inflammation is characterized by itching, scaling, reddening,
or, occasionally, blistering.
Potential Chronic Health Effects:
CARCINOGENIC EFFECTS: Classified 1 (Proven for human.) by IARC, + (Proven.) by OSHA. Classified A2 (Suspected for
human.) by ACGIH. MUTAGENIC EFFECTS: Not available. TERATOGENIC EFFECTS: Not available. DEVELOPMENTAL
TOXICITY: Not available. The substance may be toxic to kidneys, lungs, heart, cardiovascular system, upper respiratory tract,
eyes, teeth. Repeated or prolonged exposure to the substance can produce target organs damage. Repeated or prolonged
contact with spray mist may produce chronic eye irritation and severe skin irritation. Repeated or prolonged exposure to spraymist may produce respiratory tract irritation leading to frequent attacks of bronchial infection. Repeated exposure to a highlytoxic material may produce general deterioration of health by an accumulation in one or many human organs.
Section 4: First Aid Measures
Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15
minutes. Cold water may be used. Get medical attention immediately.
In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing
and shoes. Cover the irritated skin with an emollient. Cold water may be used.Wash clothing before reuse. Thoroughly clean
shoes before reuse. Get medical attention immediately.
Serious Skin Contact:
Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek immediate medical
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical
Evacuate the victim to a safe area as soon as possible. Loosen tight clothing such as a collar, tie, belt or waistband. If
breathing is difficult, administer oxygen. If the victim is not breathing, perform mouth-to-mouth resuscitation. WARNING: It may
be hazardous to the person providing aid to give mouth-to-mouth resuscitation when the inhaled material is toxic, infectious or
corrosive. Seek immediate medical attention.
Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious
person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention if symptoms appear.
Section 5: Fire and Explosion Data
Flammability of the Product:
Products of Combustion:
Products of combustion are not available since material is non-flammable. However, products of decompostion include fumes
of oxides of sulfur. Will react with water or steam to produce toxic and corrosive fumes. Reacts with carbonates to generate
carbon dioxide gas. Reacts with cyanides and sulfides to form poisonous hydrogen cyanide and hydrogen sulfide respectively.
Fire Hazards in Presence of Various Substances:
Explosion Hazards in Presence of Various Substances:
Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion of the product in
presence of static discharge: Not available. Slightly explosive in presence of oxidizing materials.
Fire Fighting Media and Instructions:
Special Remarks on Fire Hazards:
Metal acetylides (Monocesium and Monorubidium), and carbides ignite with concentrated sulfuric acid. White Phosphorous +
boiling Sulfuric acid or its vapor ignites on contact. May ignite other combustible materials. May cause fire when sulfuric acid
is mixed with Cyclopentadiene, cyclopentanone oxime, nitroaryl amines, hexalithium disilicide, phorphorous (III) oxide, and
oxidizing agents such as chlorates, halogens, permanganates.
Special Remarks on Explosion Hazards:
M i x t u r e s o f s u l f u r i c a c i d a n d a n y o f t h e f o l l o w i n g c a n e x p l o d e : p - n i t r o t o l u e n e , p e n t a s i
l v e r trihydroxydiaminophosphate, perchlorates, alcohols with strong hydrogen peroxide, ammonium tetraperoxychromate,
mercuric nitrite, potassium chlorate, potassium permanganate with potassium chloride, carbides, nitro compounds, nitrates,
carbides, phosphorous, iodides, picratres, fulminats, dienes, alcohols (when heated) Nitramide decomposes explosively
on contact with concentrated sulfuric acid. 1,3,5-Trinitrosohexahydro-1,3,5-triazine + sulfuric acid causes explosive
Section 6: Accidental Release Measures
Dilute with water and mop up, or absorb with an inert dry material and place in an appropriate waste disposal container. If
necessary: Neutralize the residue with a dilute solution of sodium carbonate.
Corrosive liquid. Poisonous liquid. Stop leak if without risk. Absorb with DRY earth, sand or other non-combustible material.
Do not get water inside container. Do not touch spilled material. Use water spray curtain to divert vapor drift. Use water spray
to reduce vapors. Prevent entry into sewers, basements or confined areas; dike if needed. Call for assistance on disposal.
Neutralize the residue with a dilute solution of sodium carbonate. Be careful that the product is not present at a concentration
level above TLV. Check TLV on the MSDS and with local authorities.
Section 7: Handling and Storage
Keep locked up. Keep container dry. Do not ingest. Do not breathe gas/fumes/ vapor/spray. Never add water to this product.
In case of insufficient ventilation, wear suitable respiratory equipment. If ingested, seek medical advice immediately and show
the container or the label. Avoid contact with skin and eyes. Keep away from incompatibles such as oxidizing agents, reducing
agents, combustible materials, organic materials, metals, acids, alkalis, moisture. May corrode metallic surfaces. Store in a
metallic or coated fiberboard drum using a strong polyethylene inner package.
Hygroscopic. Reacts. violently with water. Keep container tightly closed. Keep container in a cool, well-ventilated area. Do not
store above 23°C (73.4°F).
Section 8: Exposure Controls/Personal Protection
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective
threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-station location.
Face shield. Full suit. Vapor respirator. Be sure to use an approved/certified respirator or equivalent. Gloves. Boots.
Personal Protection in Case of a Large Spill:
Splash goggles. Full suit. Vapor respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid
inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this
TWA: 1 STEL: 3 (mg/m3) [Australia] Inhalation TWA: 1 (mg/m3) from OSHA (PEL) [United States] Inhalation TWA: 1 STEL: 3
(mg/m3) from ACGIH (TLV) [United States]  Inhalation TWA: 1 (mg/m3) from NIOSH [United States] Inhalation TWA: 1
(mg/m3) [United Kingdom (UK)]Consult local authorities for acceptable exposure limits.
Section 9: Physical and Chemical Properties
Physical state and appearance:
Liquid. (Thick oily liquid.)
Odorless, but has a choking odor when hot.
Marked acid taste. (Strong.)
pH (1% soln/water):
270°C (518°F) - 340 deg. C Decomposes at 340 deg. C
-35°C (-31°F) to 10.36 deg. C (93% to 100% purity)
1.84 (Water = 1)
3.4 (Air = 1)
Water/Oil Dist. Coeff.:
Ionicity (in Water):
See solubility in water.
Easily soluble in cold water. Sulfuric is soluble in water with liberation of much heat. Soluble in ethyl alcohol.
Section 10: Stability and Reactivity Data
The product is stable.
Conditions of Instability:
Conditions to Avoid: Incompatible materials, excess heat, combustible material materials, organic materials, exposure to moist
air or water, oxidizers, amines, bases. Always add the acid to water, never the reverse.
Incompatibility with various substances:
Reactive with oxidizing agents, reducing agents, combustible materials, organic materials, metals, acids, alkalis, moisture.
Extremely corrosive in presence of aluminum, of copper, of stainless steel(316). Highly corrosive in presence of stainless
steel(304). Non-corrosive in presence of glass.
Special Remarks on Reactivity:
Hygroscopic. Strong oxidizer. Reacts violently with water and alcohol especially when water is added to the product.
Incompatible (can react explosively or dangerously) with the following: ACETIC ACID, ACRYLIC ACID, AMMONIUM
HYDROXIDE, CRESOL, CUMENE, DICHLOROETHYL ETHER, ETHYLENE CYANOHYDRIN, ETHYLENEIMINE, NITRIC
ACID, 2-NITROPROPANE, PROPYLENE OXIDE, SULFOLANE, VINYLIDENE CHLORIDE, DIETHYLENE GLYCOL
MONOMETHYL ETHER, ETHYL ACETATE, ETHYLENE CYANOHYDRIN, ETHYLENE GLYCOL MONOETHYL ETHER
ACETATE, GLYOXAL, METHYL ETHYL KETONE, dehydrating agents, organic materials, moisture (water), Acetic anhydride,
Acetone, cyanohydrin, Acetone+nitric acid, Acetone + potassium dichromate, Acetonitrile, Acrolein, Acrylonitrile, Acrylonitrile
+water, Alcohols + hydrogen peroxide, ally compounds such as Allyl alcohol, and Allyl Chloride, 2-Aminoethanol, Ammonium
hydroxide, Ammonium triperchromate, Aniline, Bromate + metals, Bromine pentafluoride, n-Butyraldehyde, Carbides, Cesium
acetylene carbide, Chlorates, Cyclopentanone oxime, chlorinates, Chlorates + metals, Chlorine trifluoride, Chlorosulfonic
acid, 2-cyano-4-nitrobenzenediazonium hydrogen sulfate, Cuprous nitride, p-chloronitrobenzene, 1,5-Dinitronaphthlene +
sulfur, Diisobutylene, p-dimethylaminobenzaldehyde, 1,3-Diazidobenzene, Dimethylbenzylcarbinol + hydrogen peroxide,Epichlorohydrin, Ethyl alcohol + hydrogen peroxide, Ethylene diamine, Ethylene glycol and other glycols, , Ethylenimine,Fulminates, hydrogen peroxide, Hydrochloric acid, Hydrofluoric acid, Iodine heptafluoride, Indane + nitric acid, Iron, Isoprene,Lithium silicide, Mercuric nitride, Mesityl oxide, Mercury nitride, Metals (powdered), Nitromethane, Nitric acid + glycerides,p-Nitrotoluene, Pentasilver trihydroxydiaminophosphate, Perchlorates, Perchloric acid, Permanganates + benzene, 1-Phenyl-2-methylpropyl alcohol + hydrogen peroxide, Phosphorus, Phosphorus isocyanate, Picrates, Potassium tert-butoxide,Potassium chlorate, Potassium Permanganate and other permanganates, halogens, amines, Potassium Permanganate +Potassium chloride, Potassium Permanganate + water, Propiolactone (beta)-, Pyridine, Rubidium aceteylene carbide, Silverpermanganate, Sodium, Sodium carbonate, sodium hydroxide, Steel, styrene monomer, toluene + nitric acid, Vinyl acetate,Thalium (I) azidodithiocarbonate, Zinc chlorate, Zinc Iodide, azides, carbonates, cyanides, sulfides, sulfites, alkali hydrides,carboxylic acid anhydrides, nitriles, olefinic organics, aqueous acids, cyclopentadiene, cyano-alcohols, metal acetylides,Hydrogen gas is generated by the action of the acid on most metals (i.e. lead, copper, tin, zinc, aluminum, etc.). Concentratedsulfuric acid oxidizes, dehydrates, or sulfonates most organic compounds.
Special Remarks on Corrosivity:
Non-corrosive to lead and mild steel, but dillute acid attacks most metals. Attacks many metals releasing hydrogen. Minor
corrosive effect on bronze. No corrosion data on brass or zinc.
Will not occur.
Section 11: Toxicological Information
Routes of Entry:
Absorbed through skin. Dermal contact. Eye contact. Inhalation. Ingestion.
Toxicity to Animals:
WARNING: THE LC50 VALUES HEREUNDER ARE ESTIMATED ON THE BASIS OF A 4-HOUR EXPOSURE. Acute oral
toxicity (LD50): 2140 mg/kg [Rat.]. Acute toxicity of the vapor (LC50): 320 mg/m3 2 hours [Mouse].
Chronic Effects on Humans:
CARCINOGENIC EFFECTS: Classified 1 (Proven for human.) by IARC, + (Proven.) by OSHA. Classified A2 (Suspected
for human.) by ACGIH. May cause damage to the following organs: kidneys, lungs, heart, cardiovascular system, upper
respiratory tract, eyes, teeth.
Other Toxic Effects on Humans:
Extremely hazardous in case of inhalation (lung corrosive). Very hazardous in case of skin contact (corrosive, irritant,
permeator), of eye contact (corrosive), of ingestion, .
Special Remarks on Toxicity to Animals:
Special Remarks on Chronic Effects on Humans:
Mutagenicity: Cytogenetic Analysis: Hamster, ovary = 4mmol/L Reproductive effects: May cause adverse reproductive effects
based on animal data. Developmental abnormalities (musculoskeletal) in rabbits at a dose of 20 mg/m3 for 7 hrs.(RTECS)
Teratogenecity: neither embryotoxic, fetoxic, nor teratogenetic in mice or rabbits at inhaled doses producing some maternal
Special Remarks on other Toxic Effects on Humans:
Acute Potential Health Effects: Skin: Causes severe skin irritation and burns. Continued contact can cause tissue necrosis.
Eye: Causes severe eye irritation and burns. May cause irreversible eye injury. Ingestion: Harmful if swallowed. May cause
permanent damage to the digestive tract. Causes gastrointestial tract burns. May cause perforation of the stomach, GI
bleeding, edema of the glottis, necrosis and scarring, and sudden circulatory collapse(similar to acute inhalation). It may
also cause systemic toxicity with acidosis. Inhalation: May cause severe irritation of the respiratory tract and mucous
membranes with sore throat, coughing, shortness of breath, and delayed lung edema. Causes chemical burns to the repiratory
tract. Inhalation may be fatal as a result of spasm, inflammation, edema of the larynx and bronchi, chemical pneumonitis,
and pulmonary edema. Cause corrosive action on mucous membranes. May affect cardiovascular system (hypotension,
depressed cardiac output, bradycardia). Circulatory collapse with clammy skin, weak and rapid pulse, shallow respiration, and
scanty urine may follow. Circulatory shock is often the immediate cause of death. May also affect teeth(changes in teeth and
supporting structures - erosion, discoloration). Chronic Potential Health Effects: Inhalation: Prolonged or repeated inhalation
may affect behavior (muscle contraction or spasticity), urinary system (kidney damage), and cardiovascular system, heart
(ischemic heart leisons), and respiratory system/lungs(pulmonary edema, lung damage), teeth (dental discoloration, erosion).
Skin: Prolonged or repeated skin contact may cause dermatitis, an allergic skin reaction.
Section 12: Ecological Information
Ecotoxicity in water (LC50): 49 mg/l 48 hours [bluegill/sunfish].
BOD5 and COD:
Products of Biodegradation:
Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.
Toxicity of the Products of Biodegradation:
The products of degradation are less toxic than the product itself.
Special Remarks on the Products of Biodegradation:
Section 13: Disposal Considerations
Sulfuric acid may be placed in sealed container or absorbed in vermiculite, dry sand, earth, or a similar material. It may also
be diluted and neutralized. Be sure to consult with local or regional authorities (waste regulators) prior to any disposal. Waste
must be disposed of in accordance with federal, state and local environmental control regulations.
Section 14: Transport Information
Class 8: Corrosive material
: Sulfuric acid UNNA: 1830 PG: II
Special Provisions for Transport:
Section 15: Other Regulatory Information
Federal and State Regulations:
Illinois toxic substances disclosure to employee act: Sulfuric acid New York release reporting list: Sulfuric acid Rhode
Island RTK hazardous substances: Sulfuric acid Pennsylvania RTK: Sulfuric acid Minnesota: Sulfuric acid Massachusetts
RTK: Sulfuric acid New Jersey: Sulfuric acid California Director's List of Hazardous Substances (8 CCR 339): Sulfuric acid
Tennessee RTK: Sulfuric acid TSCA 8(b) inventory: Sulfuric acid SARA 302/304/311/312 extremely hazardous substances:
Sulfuric acid SARA 313 toxic chemical notification and release reporting: Sulfuric acid CERCLA: Hazardous substances.:
Sulfuric acid: 1000 lbs. (453.6 kg)
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200). EINECS: This product is on the
European Inventory of Existing Commercial Chemical Substances.
CLASS D-1A: Material causing immediate and serious toxic effects (VERY TOXIC). CLASS E: Corrosive liquid.
R35- Causes severe burns. S2- Keep out of the reach of children. S26- In case of contact with eyes, rinse immediately with
plenty of water and seek medical advice. S30- Never add water to this product. S45- In case of accident or if you feel unwell,
seek medical advice immediately (show the label where possible).
National Fire Protection Association (U.S.A.):
Gloves. Full suit. Vapor respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator
when ventilation is inadequate. Face shield.
Section 16: Other Information
-Material safety data sheet emitted by: la Commission de la Santé et de la Sécurité du Travail du Québec. -The Sigma-Aldrich
Library of Chemical Safety Data, Edition II. -Hawley, G.G. The Condensed Chemical Dictionary, 11e ed., New York N.Y., Van
Nostrand Reinold, 1987.
Other Special Considerations:
10/09/2005 11:58 PM
05/21/2013 12:00 PM
The information above is believed to be accurate and represents the best information currently available to us. However, wemake no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assumeno liability resulting from its use. Users should make their own investigations to determine the suitability of the information fortheir particular purposes. In no event shall ScienceLab.com be liable for any claims, losses, or damages of any third party or forlost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if ScienceLab.comhas been advised of the possibility of such damages.
Product group Wood-fuelled build-in fires Table of contents Congratulations on the purchase of your Kal-fire fireplace. Read this manual carefully before installing and using the fireplace. Always keep this manual close to your fireplace The Kal-fire Heat fireplace must be built-in by an authorized installer, according to prevailing national or local standards. At delivery check
UNIVERSITY OF COLORADO - SCHOOL OF MEDICINE CURRICULUM LAURA A. STROM Office Address: EDUCATION/TRAINING M.D. The Pennsylvania State University, College of Medicine 2004-present Clinical Science Research Certificate POST GRADUATE TRAINING AND FELLOWSHIP APPOINTMENTS Internship, (Psychiatry) Pennsylvania State University, College of Medicine Internship, (Medicin